Maintenance and Adjustment
1. Rebound Damping Adjuster
REAR SUSPENSION ADJUSTMENT
The rear suspension unit is adjustable for
both compression and rebound damping.
Rebound Damping Adjustment
The rebound damping adjuster is situated at
the lower left hand end of the rear
suspension unit.
To adjust the rebound damping setting,
rotate the adjuster clockwise to increase
rebound damping and anti-clockwise to
decrease.
NOTE
l
The settings are all measured as
the number of adjuster turns out
from the fully screwed in position.
l
The motorcycle is delivered from
the factory with the rebound
adjuster set to position 1.
1. Compression Damping Adjuster
Compression Damping Adjustment
The compression damping adjuster is
situated on the rear suspension unit
reservoir.
To adjust the compression damping setting,
rotate the slotted adjuster clockwise
(screw-in) to increase, or antiilockwise
(screw-out) to decrease.
NOTE:
l
The motorcycle is delivered from
the factory with the compression
damping set at 1.
A
WARNING: Rear suspension
unit spring pm-load is not
rider adjustable.
Any attempt to
adjust the spring pre-load could
result in a dangerous riding condition
leading to loss of control and an
accident.
Page 57
