Triumph Street Triple R, Owner'S Handbook Manual

Page: 58 / 245

GENERAL INFORMATION
58
Trip Set Up
This menu allows the configuration of
the trip meters.
To access the Trip Set Up menu:
▼ From the MAIN MENU, push the
joystick down and select TRIP SET
UP.
▼
Press the joystick centre to confirm.
TRIP 1 RESET
TRIP 2 RESET
TRIP 2 DISPLAY
TRIP SET UP
EXIT SELECT BACK
Selecting TRIP 1 RESET or TRIP 2 RESET
allows the relevant trip meter to be
configured manually or automatically.
The set up procedure is the same for
both trip meters.
MANUAL
AUTOMATIC
TRIP 1 RESET
EXIT SELECT BACK
Manual reset will only reset the selected
trip meter when the rider chooses to do
so. For more information, see page
58.
Automatic reset will reset each trip
meter after the ignition has been
switched off for a set time. For more
information, see page
59.
Trip meter 2 can be enabled or disabled.
For more information, see page
59.
Trip Set Up - Manual Reset
To set the trip computer to reset
manually:
▼
From the TRIP SETUP menu, push
the joystick down and then press the
joystick centre to select TRIP 1 RESET
or TRIP 2 RESET.
▼ Push the joystick centre to select
MANUAL.
RESET NOW AND CONTINUE
CONTINUE WITHOUT RESET
MANUAL
EXIT SELECT BACK
There are two options:
▼
RESET NOW AND CONTINUE - Resets
all trip meter data in the relevant trip
meter.
▼ CONTINUE WITHOUT RESET - Any
trip meter data in the relevant trip
meter will not be reset.