Triumph Street Triple R, Owner'S Handbook Manual

Page: 59 / 245

GENERAL INFORMATION
59
Trip Set Up - Automatic Reset
To set the trip computer to
automatically reset:
▼
From the TRIP SETUP menu, push
the joystick down/up and then press
the joystick centre to select TRIP 1
RESET or TRIP 2 RESET.
▼ Push the joystick down/up to select
AUTOMATIC and then press the
joystick centre to confirm.
▼ Using the joystick down/up, choose
the timer setting and press the
joystick centre to confirm the
required time limit.
▼
The required time limit is then stored
in the trip memory. A tick is shown to
indicate the selected option.
▼ When the ignition is turned off, the
trip meter is set to zero when the
time period has elapsed.
1 HR
2 HRS
AUTOMATIC
4 HRS
8 HRS
12 HRS
16 HRS
EXIT SELECT BACK
The following table shows two examples
of the automatic trip reset functionality.
Ignition
Turned Off Selected
Time Delay
Trip Meter
Resets to
Zero
10:30 hrs 4 HRS 14:30 hrs
18:00 hrs 16 HRS
10:00 hrs
(next day)
Trip 2 Enable/Disable
Trip 2 meter can be enabled or disabled.
If trip 2 meter is disabled, it will no
longer be shown in the information tray.
ENABLED
DISABLED
TRIP 2 DISPLAY
EXIT SELECT BACK
To enable or disable the Trip 2 meter:
▼ From the TRIP SET UP menu, push
the joystick down/up to scroll to the
TRIP 2 DISPLAY. Press the joystick
centre to confirm.
▼ Push the joystick down/up to scroll
between ENABLED and DISABLED.
Press the joystick centre to confirm.
A tick is shown to indicate the
selected option.