50
General Information
Tie-Down Hooks
Located on the underside of the seat are the
tie-down hooks.
The tie-down hooks are designed to help
secure a load up to 3.5 kg (7.5 lb) to the seat
using a rope.
To access and use the tie-down hooks,
remove the seat (see page
49
).
Release the hooks from the inner clip and
pivot them around and securely fit them into
the outer clips.
Refit the seat as described on page
49
.
1. Tie-down hooks
2. Inner clips
3. Outer clips
cgfq
2
3
1
1
Warning
If the seat is used to carry small objects,
they must not exceed 3.5 kg (7.5 lb) in
weight, must not impair control of the
motorcycle, must be securely attached and
must not extend beyond the rear or sides
of the motorcycle.
Carriage of objects in excess of 3.5 kg
(7.5 lb) in weight, that are insecure, impair
control or extend beyond the rear or sides
of the motorcycle may lead to loss of
motorcycle control and an accident.
Even if small objects are correctly loaded
onto the rear seat, the maximum speed of
the motorcycle must be reduced to
80 mph (130 km/h).
Summary of Contents for Speed Triple
