Triumph Speed Triple, Handbook

Page: 35 / 136

35
General Information
Tyre Pressure Sensor Serial Number
The serial number for each tyre pressure
sensor is printed on a label which is on the
sensor. This number may be required by the
dealer for service or diagnostics.
If the TPMS has been fitted at the factory,
labels identifying the front and rear sensor
serial numbers will be affixed to the spaces
below.
If the TPMS is being fitted to the motorcycle
as an accessory, ensure that the dealer
records the serial numbers of the front and
rear tyre pressure sensors in the spaces
provided below.
System Display
1. TPMS symbol
2. Tyre pressure display
3. Front tyre, identified
4. Rear tyre, identified
5. Button A
6. Button B
To access the tyre pressure display, turn the
ignition to the ON position.
Press and release button 'A' until psi or bAr is
visible in the display screen.
Press and release button 'B' to select the front
or rear tyre pressure.
When the tyre pressure monitoring system
has been selected, —— psi or bAr will be
visible in the display screen until the
motorcycle is travelling at a speed greater
than 12 mph (20 km) and the tyre pressure
signal is received.
Front Sensor Rear Sensor
Warning
Do not attempt to switch between front
and rear tyre display modes with the
motorcycle in motion as this may lead to
loss of motorcycle control and an accident
F
R
cfio_14
1
2
3
4
5
6