Triumph Scrambler 1200 Steve McQueen Edition, Owner'S Handbook Manual

Page: 37 / 196

General Information
37
Warning
After selecting a riding mode, operate
the motorcycle in an area free from
traffic to gain familiarity with the new
settings.
Do not loan your motorcycle to anyone
as they may change the riding mode
settings from the one you are familiar
with, causing loss of motorcycle
control and an accident.
Note
If when the ignition was last switched
OFF, the following conditions were met:
- Off-Road, Off-Road Pro or Rider mode
was active,
- and ABS or TC was set to Off-Road or
OFF,
then the riding mode will default to
Road when the ignition is switched ON.
Otherwise, the last selected riding mode
will be remembered and activated when
the ignition is switched ON.
If the mode icons are not shown when
the ignition switch is in the ON position,
make sure that the engine stop switch
is in the RUN position.
To select a riding mode:
• Press and release the MODE button
on the left hand switch housing to
activate the riding mode information
tray and riding mode selection
panel.
• The currently active riding mode
icon is shown in the center of the
instrument panel.
To change the selected riding mode:
• Either push the joystick left or
right, or repeatedly press the MODE
button until the required mode is
shown in the center of the display
screen or highlighted in the riding
mode selection panel.
• A brief press of the joystick center
will select the required riding mode.
A
15:53
Road
ROAD
MAP
ROAD
ROAD
TC
N
5
2
4
1
3
1. MODE button
2. Current riding mode
3. Joystick
4. Information tray showing riding mode
settings
5. Riding mode selection panel
• Push the joystick left/right or press
the MODE button to scroll through
the riding mode options in the
following order:
– Rider
– Rain
– Road
– Sport
– Off-road
– Off-road pro.
The selected mode is activated once the
following conditions for switching modes
have been met: