Triumph Scrambler 1200 Steve McQueen Edition, Owner'S Handbook Manual

Page: 106 / 196

How to Ride the Motorcycle
106
Warning
The handling characteristics of a
motorcycle at high speed may vary
from those you are familiar with at
legal road speeds.
Do not attempt high speed operation
unless you have received sufficient
training and have the required skills
as a serious accident may result from
incorrect operation.
Warning
The items listed below are extremely
important and must never be
neglected. A problem, which may not
be noticed at normal operating speeds,
may be greatly exaggerated at high
speeds.
General
Make sure that the motorcycle has been
maintained according to the scheduled
maintenance chart.
Brakes
Check that the front and rear brakes
are functioning correctly.
Coolant
Check that the coolant level is at the
upper level line in the expansion tank.
Always check the level with the engine
cold.
Electrical Equipment
Make sure that all electrical equipment
such as the headlight, rear/brake light,
turn signals and horn all work correctly.
Engine Oil
Check that the engine oil level is correct.
Make sure that the correct grade and
type of oil is used when topping off.
Drive Chain
Make sure that the drive chain is
correctly adjusted and lubricated.
Inspect the chain for wear and damage.
Fuel
Have sufficient fuel for the increased
fuel consumption that will result from
high speed operation.
Caution
In many countries, the exhaust system
for this model is equipped with a
catalytic converter to help reduce
exhaust emission levels.
The catalytic converter can be
permanently damaged if the
motorcycle is allowed to run out of
fuel or if the fuel level is allowed to get
very low.
Always make sure you have adequate
fuel for your trip.