18 of 20
3.
Ensure that the third mount rocker arm fits into
the locating cup moulded into the front of the
pannier.
1. Rocker arm (left hand shown)
2. Locating cup
4.
Lock the pannier to the pannier mountings by
pressing the carrying handle to the fully closed
position whilst turning the key to the LOCK
position. Remove the key.
To remove each pannier:
Note:
•
The same procedure can be followed to remove
and mount the left hand or the right hand
panniers.
1. Lock
2. Carrying handle
1.
To unlock and remove the pannier from the
pannier mountings, turn the key to the RELEASE
position and lift the carrying handle to its fully
raised position. Lift the pannier free from the
pannier mountings.
Pannier Operation
1. Key slot (shown in the LOCK position)
2. Lock position symbol
3. Unlock position symbol
4. Release position symbol
1.
To unlock and open the pannier, insert the key
and turn it to the UNLOCK position, then press
down on the latch plate. The lid can then be
opened.
1. Lock
2. Latch plate
2
1
1
2
4
Caution
The pannier lid has two latch positions; the first
latch position acts as a safety catch. Always ensure
the pannier lid is fully closed on to the second latch
position, as the pannier will not fully seal on the first
latch position. Riding the motorcycle with the
pannier lid in this position may allow water or dust
ingress into the pannier, causing damage to the
pannier contents.
2
3
4
1
1
2
4
