Triumph 2010 Rocket III, Handbook

Page: 82 / 108

82
Maintenance and Adjustment
Tyre Replacement
All Triumph motorcycles are carefully and
extensively tested in a range of riding
conditions to ensure that the most effective
tyre combinations are approved for use on
each model. It is essential that approved
tyres, fitted in approved combinations, are
used when purchasing replacement tyres.
The use of non-approved tyres, or approved
tyres in non-approved combinations, may
lead to motorcycle instability and an accident.
On models fitted with ABS, different wheel
speeds, caused by non-approved tyres can
affect the function of the ABS computer.
See the Specification section for details of
approved tyre combinations. Always have
tyres fitted and balanced by your authorised
Triumph dealer who has the necessary
training and skills to ensure safe, effective
fitment.
Warning
Operation with excessively worn tyres is
hazardous and will adversely affect
traction, stability and handling which may
lead to loss of control and an accident.
When tubeless tyres become punctured,
leakage is often very slow. Always inspect
tyres very closely for punctures. Check the
tyres for cuts, embedded nails or other
sharp objects. Operation with punctured
or damaged tyres will adversely affect
motorcycle stability and handling which
may lead to loss of control or an accident.
Check the rims for dents or deformation.
Operation with damaged or defective
wheels or tyres is dangerous and loss of
motorcycle control or an accident could
result.
Always consult your authorised Triumph
dealer for tyre replacement, or for a safety
inspection of the tyres.
Warning
On models fitted with ABS, the ABS
computer operates by comparing the
relative speed of the front and rear wheels.
Use of non-recommended tyres can affect
wheel speed and cause the ABS function
not to operate, potentially leading to loss of
control and an accident in conditions
where the ABS would normally function.
Warning
If a tyre sustains a puncture, the tyre must
be replaced. Failure to replace a
punctured tyre, or operation with a
repaired tyre can lead to instability, loss of
control or an accident.
Warning
Do not install tube-type tyres on tubeless
rims. The bead will not seat and the tyres
could slip on the rims, causing rapid tyre
deflation that may result in a loss of vehicle
control and an accident. Never install an
inner tube inside a tubeless tyre. This will
cause friction inside the tyre and the
resulting heat build-up may cause the tube
to burst resulting in rapid tyre deflation,
loss of vehicle control and an accident.