Triumph Adler P-C3065 MFP Operation Manual Download Page 41

Page: 41 / 184

3-10

Sending Faxes > Methods For Entering the Destination

Choosing from the Address Book

Select a destination registered in the Address Book.

[FAX] key > [Address Book] key

Select the destination.

Destination Search

The destination can be searched by name.

[

Menu

] > [

Search (Name)

] > [

] key

Enter characters to search using the numeric keys.

Select the [

] key.

The searched destination is displayed.

Select the [OK] key.

To send to multiple destinations, repeat steps 2 to 3. You can send to as many as 100
destinations at once.

NOTE

For more information about how to register destinations in the Address Book, refer to the following:

Registering Destinations in the Address Book (page 2-11)

NOTE

When checking information of the destination, select [

Menu

], select [

Details

], and then

select the [

] key.

NOTE

For details on character entry, refer to the following:

Character Entry Method (page 10-2)

NOTE

To check or change a selected destination, refer to the following:

Checking and Editing Destinations (page 3-4)

Summary of Contents for P-C3065 MFP

























































































































































































Search results

Summary of Contents for P-C3065 MFP

Reviews:

Related manuals for P-C3065 MFP

Brands by name

Popular brands

Triumph Adler P-C3065 MFP, Operation Manual

Search results

Summary of Contents for P-C3065 MFP

Reviews:

Related manuals for P-C3065 MFP

Brands by name

Popular brands