Triumph Adler LP 4118, Instructions Manual, Page: 32 / 50

Printing
16 OPERATION GUIDE
Manual Duplex
Use Manual Duplex if you require printing on both sides of the paper. The
even pages are printed first and then reloaded to print the odd pages. An
instruction sheet is available to assist with loading the sheets in the correct
orientation and order.
NOTE:
Ensure Print Instructions is selected to receive the instruction
sheet. Continue to use the sheet until you are familiar with this feature.
1
Ensure Cassette 1 is selected as
the Source in the print Properties
dialog box.
2
Select the Layout tab and then
Print on Both Sides (Manual
Duplex)
.
Select Flip on Long Edge for
binding on the long edge or Flip
on Short Edge for binding on the
short edge.
Select Gutter Settings and enter
the value required in the Gutter
field. Gutter width range: 5.00 to 25.4 mm (0.20 to 1.00 inch).
3
Select OK to return to the Print dialog box and select OK to start printing.
A Manual Duplex instruction message box displays.
4
Remove all the even pages
(including the instruction sheet)
from the output tray and load them
into the paper cassette, with the
instruction sheet facing up and
the arrows pointing toward the
printer.
NOTE:
Nothing will be printed on the instruction sheet. If the paper is
curled, straighten it out before loading the paper in the cassette.
5
Select OK on the Manual Duplex instruction message box. All the odd
pages will be printed.