Triumph Adler DC 2440, Instruction Handbook Manual

Page: 84 / 175

4
FAX Operation (Advanced)
4-33
Polling Communication
Polling communication is a communication mode in which the transmission of originals on the sending machine is
controlled by the receiving machine. This allows the receiving machine to tailor the reception of originals to its own
circumstances. This machine supports both polling transmission and polling reception.
IMPORTANT: Because the receiving machine dials the sending machine in polling communication, call charges are
normally borne by the recipient.
Polling Transmission
Originals to be used in polling transmissions should be stored in a Polling box. When a polling request is received
from the destination, the stored originals are sent automatically.
Once originals intended for polling transmission have been sent to the destination, they are automatically deleted.
However, if you set
Delete TX File to [Off], the originals are stored in the Polling box until you delete them. You can
use polling transmission with the same originals as many times as you wish. ( Refer to page 4-34 .)
NOTE:
You can store up to 10 originals for polling transmission.
You can also add to or overwrite originals up until a polling request arrives from the destination. Refer to Overwrite
Setting on page 4-35 .
Bulletin Board Communication
This is a communication mode that allows a Polling box to be used like a bulletin board, giving multiple recipients free
access to the stored originals. Set
Delete TX File to [Off] so that the same original can be polled multiple times.
Polling Box
External FAX
External FAX