Triumph Adler DC 2440 Instruction Handbook Manual Download Page 151

Page: 151 / 175

Troubleshooting

8-2

Indicators During Sending/Receiving Operation

The

Send/Receive

and

Memory

indicators show the fax

transmission status.

• The

Send/Receive

indicator blinks when the machine is

sending/receiving a fax.

• The

Memory

indicator blinks when source data is being

stored in memory for memory transmission.

• The

Memory

indicator is lit when there is source data

stored in the memory for delayed transmission.

Precautions When Turning Power OFF

To receive faxes with the power turned off, press the

Power

key on the operation panel. You cannot automatically

receive a fax when the main power switch is turned off.

Before turning off the main power switch, press the

Power

key on the operation panel. Make sure that the

Memory

indicator is off before turning off the main power switch.

CAUTION:

The device may still be operating as long as the

Memory

indicator is lit. Turning the machine off

at the main power switch while the memory indicator lits, may cause malfunctions.

Make sure that the indicator is off.

Summary of Contents for DC 2440
















































































































































































Search results

Summary of Contents for DC 2440

Reviews:

Related manuals for DC 2440

Brands by name

Popular brands

Triumph Adler DC 2440, Instruction Handbook Manual

Search results

Summary of Contents for DC 2440

Reviews:

Related manuals for DC 2440

Brands by name

Popular brands