Triumph Adler DC 2316, Instruction Handbook Manual

Page: 55 / 163

OPERATION GUIDE 7-1
7 Using QLINK
The QLINK is a software utility that allows you to quite easily, with very few mouse
clicks, access the most frequently used scanning applications. Using the QLINK
eliminates the need to manually launch the specific applications and allows you to
scan a document directly to a folder on your computer. The QLINK provides three
categories of operations, as shown below:
1
MFP Button Setting Section - Configure [Scan To PC] on the operation
panel.
2
Copy Function Section - Enhanced copy functions, such as Four/Two or One-
on-One Copying.
3
Scan Function Section - Scan directly to a file, or email. User-defined buttons
allow you to configure a button to meet your own application requirements.
Two of the three sections in the above QLINK figure have a number of different
buttons which are predefined for the most frequently used applications.
The Scan
Function section contains one button for Send to file , one button for Send to email ,
and three user-defined buttons with which you can assign your desired application.
The
Copy Function section contains three buttons for 4 to 1 copying. The MFP button
setting section contains a big button, called Scan to , which allows you to configure
[Scan To PC] on the operation panel.
To Start the QLINK
Double-click , and then click the small QLINK icon located in the status area and
the QLINK appears.
1 2
3