Triumph Adler DC 2316 Instruction Handbook Manual Download

Page: 36 / 163

Preparations

3-2

OPERATION GUIDE

Turning the Machine On

Turn the power switch on. The machine will
begin to warm up after which the ready
screen is displayed.

Loading Software

Installing the Printer Driver and Scanner Driver.

Ensure the machine is plugged in and connected to the computer’s USB port before
installing software from the CD-ROM.

Required operating systems (OS) for using the Software:
Microsoft Windows 98SE/Me/2000/XP

Examples of the operations given in this guide are for the Windows XP. Essentially
the same operations

are used for Windows 98SE/Me/2000 environments.

Switch on the PC and activate Windows.

NOTE:

If the

Welcome to the Found New

Hardware Wizard

dialog box displays,

select

Cancel

Insert the CD-ROM (Product Library) into
the CD-ROM drive. Once the installation
program launches, the License Agreement
Notice is displayed.

NOTE:

If the installation program fails to launch, use

Windows Explorer

to access

the CD-ROM and

double-click

Setup.exe

Click

View License Agreement

to display and read it.

Summary of Contents for DC 2316




































































































































































Search results

Summary of Contents for DC 2316

Reviews:

Related manuals for DC 2316

Brands by name

Popular brands

Triumph Adler DC 2316, Instruction Handbook Manual

Search results

Summary of Contents for DC 2316

Reviews:

Related manuals for DC 2316

Brands by name

Popular brands