Triumph Adler DC 2215, Instruction Handbook Manual

Page: 38 / 52

7-1
CHAPTER 7 WHEN A PROBLEM OCCURS
1. Error display
When any of the indications listed in the table below appears on the operation panel, take the corrective action as instructed.
Indication
“A” and “100” alternate on the copy quantity
display.
“C” and “610”, “620”, “630” or “710” alternate
on the copy quantity display.
“A” and “310”, “400” or “401” alternate on the
copy quantity display.
Action
Turn the main switch OFF and ON and check that the lamp under the platen
turns on during copying.
If the lamp turns on, leave the power turned on for approximately 1 hour. If the
same indication appears again, contact your service representative.
If the lamp does not turn on, contact your service representative.
Contact your service representative.
Turn the main switch OFF and ON. If the same indication appears again, contact
your service representative.
Page
––
––
––