Triumph Adler DC 2118, Instruction Handbook Manual

Page: 47 / 108

Basic Operation
3-6
1 Set the original.
2
Press [2-sided], select the type of original and select , or to light up the
corresponding display.
3 Enter the number of copies using numeric keys.
4 Press the Start key. Scanning of the original starts.
If the originals have been set in the optional document processor, copying starts automatically.
If the original has been set on the platen, a message prompting replacement of the original is
displayed. In this case, proceed to the next step.
5 Replace the original and press the Start key. Scanning of the original starts.
6 If no original remains, press the Enter key. Copying starts.
2 sided->2 sided
(2-sided copying from 2-sided
originals)
Front and back sides of originals are copied in the same way onto
both sides of copy paper.
Note
The paper sizes that can be used are A3 to A5R, Folio, 11 × 17"
(Ledger), 8
1/2
× 14" (Legal), 8
1/2
× 11" (Letter), 11 × 8
1/2
",
5
1/2
× 8
1/2
" (Statement), 8
1/2
× 13" (Oficio II), 8K, 16K, and 16KR.
Book->2-sided
(2-sided
copying from double-page
spread originals)
A double-page spread original of magazines, books, etc. can be
copied onto both sides of copy paper by pressing the
Start key one
time.
Note
The original sizes that can be used are A3, B4, A4R, B5R, A5R,
11 × 17" (Ledger), 8
1/2
× 11" (Letter), and 8K. The paper sizes are
limited to 11 × 8
1/2
" and 16K in the inch specifications and A4, B5,
and 16K in the metric specifications.The paper size can be changed
and the zoom ratio adjusted to fit the size of the paper.
Mode Description
Original Copy
Original Copy