English
14
DF-710, MT-710, BF-710, PH-5A, PH-5B AND PH-5C OPERATION GUIDE
2
Load the originals in the Document Processor, or
one at a time on the Platen.
Ensure the orientation of the originals is the same
as that selected for
Hole Punch mode
on the
machine.
NOTE:
Refer to the
Operation Guide
for the
machine for Document Processor and Platen
specifications.
3
Select other features as required and press
Start
.
4
The copies are automatically hole punched and
ejected onto the selected tray.
NOTE:
Holes are punched in each copy
individually, therefore the location of the
holes may vary on each sheet.
On completion of the job, remove all the copies.
Interrupt Mode
1
Specify the settings for interrupt mode at from the machine operation panel.
NOTE:
For more information on
interrupt mode
operation, see the machine operation
guide. Specify the output tray at the machine.
2
Take out the any existing original and set the original to use for
interrupt mode
.
3
Set desired copier functions or output tray destination and press
Start
. Copying begins and
paper is output to the selected tray.
When done copying in
interrupt mode
, turn off interrupt copy mode from the machine itself.
4
Replace the original and press
Start
. Copying of the interrupted job resumes.
