English
DF-710, MT-710, BF-710, PH-5A, PH-5B AND PH-5C OPERATION GUIDE
13
A maximum of 16 sheets can be bound in a single operation. Up to 64 original sheets can
be loaded at one time.
3
Select other features as required and press
Start
.
4
Copies will be automatically stapled and ejected
onto the folding tray.
If the maximum capacity is reached, a message
displays. Remove all copies from the folding tray
to continue.
NOTE:
For further information refer to
Center-Folding Unit (option)
on page
37
.
5
On completion of the job, remove the copies from the folding tray.
Hole Punch Mode
This mode produces hole punched copies
automatically.
Hole Punch mode
can be used with
Sort: ON
,
Staple
and
Sort: OFF modes
.
The following paper sizes can be used:
Inch models
•
2-hole punch: 8
1/2
×
14", 8
1/2
×
13
1/2
",
8
1/2
×
13", 8
1/2
×
11", 5
1/2
×
8
1/2
", A3, B4, A4, A4R, B5, B5R, A5R and Folio
•
3-hole punch: 11
×
17", 11
×
8
1/2
", A3 and A4
Metric models
•
2-hole punch: A3, B4, A4, A4R, B5, B5R, A5R, Folio, 8
1/2
×
14", 8
1/2
×
13
1/2
",
8
1/2
×
13", 11
×
8
1/2
", 8
1/2
×
11" and 5
1/2
×
8
1/2
"
•
4-hole punch: A3, A4, 11
×
17" and 11
×
8
1/2
"
Paper weights must be between 45 g/m
2
and 200 g/m
2
.
NOTE:
Punching requires the optional punching unit. Tray C cannot be specified as the
output destination for punch mode.
1
Select
Hole Punch mode
on the operation panel of the machine.
NOTE:
Refer to the
Operation Guide
for the machine for more detailed information.