Triumph Adler 355ci Operation Manual Download

Page: 33 / 184

3-2

Sending Faxes > Basic transmission procedure

Basic transmission procedure

The basic procedure for using the fax system is explained below.

Select [FAX] on the Home screen.

The base screen for fax appears.

Place the originals.

For placing originals, refer to the following:

Select the transmission method.

There are two transmission methods: memory transmission and direct transmission.

Memory transmission:

The original is scanned into memory before communication starts.

Memory transmission is selected by default.

Direct transmission:

The destination is dialed and communication starts before the original is

scanned.

Select [

Direct

] to change the transmission method to direct transmission. The key will be

highlighted on the touch panel. If the [

Direct

] is selected in the highlighted state,

the transmission method will change to memory transmission.

Specifying destination.

Specify the transmission destination.

Selecting the functions.

Select [

Functions

], and set transmitting functions that can be used.

Machine’s

Operation Guide

FAX Direct Transmission (page 3-18)

Methods For Entering the Destination (page 3-7)

Fax transmission functions (page 3-15)

Summary of Contents for 355ci

























































































































































































Search results

Summary of Contents for 355ci

Reviews:

Related manuals for 355ci

Brands by name

Popular brands

Triumph Adler 355ci, Operation Manual

Search results

Summary of Contents for 355ci

Reviews:

Related manuals for 355ci

Brands by name

Popular brands