2-12
Before Using the Fax Machine > Registering Destinations in the Address Book
3
Enter the fax number.
1
Select [
FAX
].
2
Enter the fax number of the receiving system.
4
Select transmission settings.
The transmission start speed, ECM, and encrypted transmission can be set.
1
Select [
Detail Settings
].
2
Select [
TX Start Speed
], [
ECM
] and [
Encrypted Transmission
] and set each item then
select [
OK
].
NOTE
Up to 32 characters can be entered.
Use the numeric keys to enter a number.
Character Entry Method (page 10-2)
Key
Description
Pause
Selecting this key adds about three seconds of waiting time during dialing.
For example, when dialing the receiving system on an external line, you can
use this method to insert a pause before resuming dialing after you dial a
specific number.
Space
It is possible to enter half-width spaces in the entry of the destination number.
This is useful when checking if the destination number has been entered
correctly.
< >
Moves the cursor.
Backspace
To correct the fax number, select [
Backspace
] on the touch panel, and delete
the digits one by one before reentering the fax number. To delete the number
entirely, select the [
Clear
] key on the operation panel.
Key
Description
Detail Settings
TX Start Speed
This is set to change the transmission start speed.
Select the speed from 33,600 bps, 14,400 bps, and 9,600
bps.
NOTE
Normally the default setting should be used.
ECM
ECM is a communication mode specified by the ITU-T
(International Telecommunication Union) that retransmits
data when an error occurs. Fax machines that have ECM
mode check for errors as they communicate, preventing
distortion of the image due to noise on the line and other
conditions.
Encrypted
Transmission
This is set when using encrypted transmission to send the
data.
Summary of Contents for 355ci
Page 1: ...FAX Operation Guide ...
Page 183: ......
Page 184: ...First edition 2017 4 2VMGEEN500 ...
