Triton TROS125, Operating/Safety Instructions Manual

Page: 4 / 82

4
GB
Technical Abbreviations Key
Wear hearing protection
Wear eye protection
Wear breathing protection
Wear head protection
Wear hand protection
WARNING - To reduce the risk of injury, user must read instruction
manal!
Caution!
Toxic fumes or gases!
Always disconnect from the power supply when adjusting, changing accessories,
cleaning, carrying out maintenance and when not in use!
Dust extraction required or recommended
For indoors use only!
Class II construction (double insulated for additional protection)
Conforms to relevant legislation and safety standards.
Environmental Protection
Waste electrical products should not be disposed of with household waste.
Please recycle where facilities exist. Check with your local authority or retailer
for recycling advice.
Description of Symbols
The rating plate on your tool may show symbols. These represent important information about
the product or instructions on its use.
Specification
Model number: TROS125
Voltage: 220–240V
Power: 280W
No load speed: 7000–12,000min
-1
Sanding disc attachment: Hook & Loop
Sanding disc size: Ø125mm
Orbit diameter: 2.5mm
Protection class:
Ingress protection:
IP20
Power cord length:
3m
Weight:
1.75kg
Sound & vibration information
Sound pressure L
PA
: 75.4dB(A)
Sound power L
WA
: 86.4dB(A)
Uncertainty K: 3dB
Weighted vibration a
h
: 6.33m/s
2
Uncertainty K: 1.5m/s²
The sound intensity level for the operator may exceed 85dB(A)
and sound protection measures are necessary.
WARNING
: Always wear ear protection where the sound level exceeds 85dB(A) and limit the
time of exposure if necessary. If sound levels are uncomfortable, even with ear protection, stop
using the tool immediately and check the ear protection is correctly fitted and provides the
correct level of sound attenuation for the level of sound produced by your tool.
WARNING
: User exposure to tool vibration can result in loss of sense of touch, numbness,
tingling and reduced ability to grip. Long-term exposure can lead to a chronic condition. If
necessary, limit the length of time exposed to vibration and use anti-vibration gloves. Do not
operate the tool with hands below a normal comfortable temperature, as vibration will have a
greater effect. Use the figures provided in the specification relating to vibration to calculate the
duration and frequency of operating the tool.
Sound and vibration levels in the specification are determined according to EN60745 or
similar international standards. The figures represent normal use for the tool in normal
working conditions. A poorly maintained, incorrectly assembled, or misused tool, may produce
increased levels of noise and vibration.
www.osha.europa.eu
provides information on sound
and vibration levels in the workplace that may be useful to domestic users who use tools for
long periods of time.
Thank you for purchasing this Triton tool. This manual contains information necessary for
safe and effective operation of this product. This product has unique features and,
even if you are familiar with similar products, it is necessary to read this manual carefully
to ensure you fully understand the instructions. Ensure all users of the tool read and fully
understand this manual.
Original Instructions
Introduction
V Volts
~, AC
Alternating current
A, mA Ampere, milli-Amp
n
0
No load speed
opm Orbits or oscillations per minute
Ø Diameter
Hz Hertz
W, kW
Watt, kilowatt
/min or min
-1
Operations per minute
rpm
Revolutions per minute
dB(A) Decibel sound level
(A weighted)
m/s
2
Metres per second
squared (vibration
magnitude)
As part of our ongoing product development, specifications of TRITON products may
alter without notice.
545243_Z1MANPRO1.indd 4 09/03/2017 16:18