Installation and user guide- 7
TRITON™ signage :
IMAGE 1
SIGNAGE
MODE
MAIN DEVICE
EXPLANATIONS
- Monitoring mode.
- The siren emits a 85+ dB signal at 10 feet when triggered by
the fall of a 18+ lbs body in the pool.
DETECTION
LED
:
(blinks in green
quickly)
To switch to this mode :
- From the “INACTIVE DETECTION” mode: type any key twice.
(or wait for the automatic reactivation, it could take up to 10mn)
- From the “OFF” mode: type any key.
-
Mode which allows swimming.
-
The siren won’t trigger ON while you are swimming.
-
TRITON™ could switch automatically to this mode if it
detects too much wind, and therefore monitoring can not be
guaranteed.
NEVER LEAVE THE POOL UNATTENDED IN THIS MODE.
INACTIVE
DETECTION
LED
:
(blinks in red
quickly)
To switch to this mode :
-
From the “INACTIVE DETECTION” mode: type the password
(initially 1234).
- The siren CAN emits a 85+ dB signal at 10 feet when
triggered by the fall of a body in the pool.
-
TRITON™ will switch automatically to this mode if
"DETECTION MODE" is activated so that it detects too
much movement in the pool.
NEVER LEAVE THE POOL UNATTENDED IN THIS MODE.
REACTIVATION
LED
:
(blinks in red /
green quickly)
To switch to this mode :
From the “INACTIVE DETECTION” mode: type twice on any key
-
Mode which allows you to change the password.
-
You have to enter the old password once, then, enter the
new one twice.
In case of a good password entry, the LED
will blink in
yellow during one second for each try.
PASSWORD
CHANGE
LED
:
(still)
To switch to this mode : type 122344 (manual mode code) +
1111 (password change code)
