16
Insert the stringer elements into the seat
and pull the seat backwards. Grab from
behind to the front part of the seat
(as on
the picture below).
Pull as far until the seat is located
approximately 10 cm in front of the cross
rib #4.
(you will find out, what position suits you
best quickly)
.
This process takes a bit more strength,
when the boat is new. The seat extends a
bit, so it gets easier each time.
It might help to slightly press the two
stringer elements inside the boat, in order
to place the seat easier.
Then reconnect the two stringer elements.
Now insert cross rib #3. Proceed in the
same way as with cross rib #4.
Clip all the stringer into the cross rib's
clips.
Please use the "ideal move", as shown
with cross rib #4
