15
Raise the cross rib slowly.
Please make sure, not to snag the cross
rib on the coaming channel
Then clip the stringers into the cross rib's
clips.
Best is to grab the cross rib from the
opposite side with your thumb above the
clip.
Then press the stringer from the bottom
into the clip.
(see picture)
Thus you get the best leverage and need
less power.
On the left the "ideal move".
You can also try to clip the two top stringer
into the clips while raising the cross rib.
It is not that easy, but it will save you from
pushing up the stringer later on.
Please
do not clip in the coaming
, yet!
Installation of the hanging seat
After installing the cross rib #4 reopen the
connection of the two stringer closest to
the keel.
Slide the sleeve and disconnect the locks.
This will be easy now, because there isn't
anymore pressure to it.
Then take the seat. The filling tube to
inflate the seat always faces forwards,
towards the bow.
grab with your thumb above
the clip
press from bottom to top
bow
Stern
