Triton Systems ©
8
determine if plinth required
Triton Systems offers an optional, metal-constructed plinth with leveling feet. Each plinth is 2
3/8
inches in
height, allowing you to adjust the ATM height by a fixed amount and still be able to adjust up using the leveling
feet. A plinth enables the ATM to be installed through the wall at the required height. To determine if a plinth is
needed with your unit, see
wall opening/trim dimensions
.
1. If plinth will be used, secure cabinet to plinth before installing cabinet into wall opening.
2. If cabinet will be secured to floor, drill anchor holes before installing cabinet into wall opening.
**Note**
The leveling feet on the cabinet itself should
not
be used to raise the unit significantly.
required parts and tools
Required Tools:
No. 2 phillips screwdriver
3/4
” (19mm) socket
1/2”
carbide-tipped masonry drill bit, 6” long
Adjustable crescent or ratchet wrench
1/4
” open-ended or ratchet wrench
Rotary hammer
7/16
” box or socket wrench
Torque wrench 60 foot-pounds
5/32
” allen wrench
Water-resistant sealant (caulk)
Recommended Tools: Bubble level
Pencil
Center punch (for marking drill points)
Portable vacuum cleaner
Chisel
Screwdriver, large flathead
Diagonal cutters
Tape measure
Framing square
Wire brush
Hammer
Due to the size of the ARGO FT, recommended safety tools include: a lifting/moving device such as pallet jack,
forklift, trolley, etc., wooden or metal safety blocks to support the ATM during installation, a crowbar and/or a
level, back support belt, ear plugs, and safety goggles.
**Note**
Standard anchor kit (Triton P/N
) is required for installation. This does not ship with unit and must
be purchased separately. Contact customer service at 1 (800) 259-6672 option 3 for availability, or click part num-
ber to order online.