-
１１
- XM095 V1.2 NR
Music control
With this function, you can run the internal program sound-controlled.
Information
Time information
Power on time
With this function, you can display the temporary running time of the device from the last power on. The display
shows “XXXX”, “XXXX” stands for the number of hours. The counter is resetted after turning the device off.
Total run time
With this function, you can display the running time of the device. The display shows “XXXX”, “XXXX” stands for
the number of hours.
Total lamp time
With this function, you can display the running time of the lamp. The display shows “XXXX”, “XXXX” stands for the
number of hours.
Lamp off time
With this function, you can display the temporary running time of the lamp from the last lamp on. The display
Shows “XXXX”, “XXXX” stands for the number of hours. The counter is resetted after turning the lamp off.
Clear lamp time
With this function you can clear the running time of the lamp. Please clear the lamp time every time you replace the
lamp.
• Select
“Clear lamp time”
by turning the encoder.
• Press the encoder, the display shows “ON” or “OFF”.
• Press the encoder to confirm.
• Press the Mode/Esc-button in order to return to the main menu.
Temp. Info.
Base Temp
With this function you can display the temperature in the projector base (near LCD-display) in Celsius.
Head Temp
With this function you can display the temperature on the display board of the base (near CMY-filter) in Celsius.
Software version
With this function, you can display the software version of the device.
• Select
“Software version”
by turning the encoder.
• Press the encoder, the display shows
“V-X.X”
, “X.X” stands for the version number, e.g. “V-1.0”, “V-2.6”.
• Turn the encoder in order to read the version of every individual IC.
• Press the Mode/Esc-button in order to return to the main menu.
LAMP CONTROL
When the real temperature around the lamp is higher than the preset value, the lamp will be shut down in 5
minutes automatically.
·
When the LCD display shows “Off”, it means the lamp must be turned on again manually;
·
When the LCD display shows “Hot”, it means the actual temperature around the lamp is still higher than the
preset value, so even the lamp can not be striked even the menu Lamp is turned to ON, as the lamp switch is
compelled to turned off.
·
When the temperature unit after the temperature value come to lowercase letter “c” or “f”, it means menu
Lamp is turned to ON, but the lamp is not full dimming up.
·
When the temperature unit after the temperature value come to capital letter “C” or “F”, it menu Lamp is
turned to ON, and the lamp is full intensity
.
