English
TR-SRL-574
Pag. 6
DMX pack.
39. DMX Polarity Select: Used to select DMX polarity.
40. Audio Input: This jack accepts a line level audio input signal ranged from
100Mv to 1V pp.
41. Remote Input: Black Out and Full On may be controlled by a remote control
using a standard 1/4” stereo jack.
42. Fog Machine Connector.
V.- OPERATION
1. Being Programming
1.1 Recond Enable
1) Press and hold down the Record button.
2) While holding down the Record button, tap the Flash buttons 1, 6, 6 and 8 in
sequence.
3) Release the Record button, the Record LED lights up, now you can begin
programming your chase patterns.
NOTE:
The first time you turn on your unit, the default setting of the Record Code is Flash
buttons 1, 6, 6 and 8.
You may change the Record Code to protect your programms.
1.2 Security for Your Programs
To protect your programs from any editing by others, you may change the
Record Code.
1) Enter current Record Code (Flash buttons 1, 6, 6 and 8).
2) Press and hold down the Record and Edit buttons at a time.
3) While holding the Record and Edit buttons, tap the desired Flash button to
enter a new Record Code.
The Record Code consists of 4 Flash buttons(the same button or different
buttons), be sure your new Record Code consists of 4 Flash buttons.
4) Enter your new Record Code a second time, all channel LEDs and scene
LEDs will flash three time, now the Record Code is changed.
5) Exit Record mode. Tap the Rec Exit button while pressing and holding down
the Record button, release the two buttons at a time, the Record mode is
disengaged.
IMPORTANT!!!
Always remember to exit Record mode when you won’t continue your
programming, otherwise you may lose control of your unit.
NOTE:
The second time you enter your new Record Code different from that of the
first time, the LEDs will not flash, which means you’ve failed to change the
