XM1093-V1.2.0-NR
8
a)
Fixed the clamp on the bracket by tighten up the M12 screw on the bracket to the
Ф
13 hole in
the middle of the bracket.
b)
Insert the quick-lock fasteners of the first Omega holder into the respective holes on the
bottom of the device. Tighten the quick-lock fasteners fully clockwise.
c)
Install the second Omega holder.
d)
Pull the safety-rope through the holes on the bottom of the base and over the trussing system
or a safe fixation spot. Insert the end in the carabine and tighten the safety screw.
Notice: this step is quite important to ensure that the fixture will not drop out by the
damage of the clamp.
Dimensional Drawings:
