XM1093-V1.2.0-NR
32
spots (ceiling, suspension, trussing).
3) Mechanically moved parts must not show any traces of wearing and must not rotate with
unbalances.
4) The electric power supply cables must not show any damage, material fatigue or sediments.
Further instructions depending on the installation spot and usage have to be adhered by a skilled
installer and any safety problems have to be removed.
In order to make the lights in good condition and extend the life time, we suggest a regular
cleaning to the lights.
1) Clean the inside and outside lens each week to avoid the weakness of the lights due to
accumulation of dust.
2) Clean the fan each week.
3) To make sure the smooth gobo rotation, we suggest adding proper lube to the wheel each
three month, avoiding the excessive lube splashes during the gobo rotating.
4) A detailed electric check by approved electrical engineer each three month, make sure that
the circuit contacts are in good condition, prevent the poor contact of circuit from
overheating.
We recommend a frequent cleaning of the device. Please use a moist, lint- free cloth. Never use
alcohol or solvents.
There are no serviceable parts inside the device except for the lamp. Please refer to the
instructions under “Installation instructions”.
Should you need any spare parts, please order genuine parts from your local dealer.
12. TECHNICAL SPECIFICATIONS
Power supply:
AC 100-240V~
，
50/60Hz
Power consumption
:
500W
Lamp:
MSD Platinum 17 RA
Lamp power:
350W
Packing dimensions:
69.5 x 49.5 x 42.5 cm
Net weight:
25.5 KGS
Gross weight:
30 KGS
Remark
:
errors and omissions for every information given in this manual excepted. All
information is subject to change without prior notice.
