Triton Blue MEGA-BEAM-G1, User Manual

Page: 25 / 34

XM1093-V1.2.0-NR 24
3
．
Press< ENTER>, the display will show
“
Initial status
”
.
4
．
The display show “ XXX ” .
5
．
Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.
8.4.6 Select Signal
1
．
Tap <MODE/ESC>button
，
access the main menu
，
Tap the <Up/Down>button until
“
Personality
”
is displayed. Press ENTER, the display will show
“
Personality
”
.
2
．
Press <Up/Down>, the display will show
“
Select Signal
”
.
3
．
Press< ENTER>, the display will show
“
Select Signal
”
.
4
．
The display show “ DMX Only ” , Press <Up/Down>, the display will show “Art-Net
On IP2”, “Art-Net On IP10”.
5
．
Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.
8.4.7 Set Universe
1
．
Tap <MODE/ESC>button
，
access the main menu
，
Tap the <Up/Down>button until
“
Personality
”
is displayed. Press ENTER, the display will show
“
Personality
”
.
2
．
Press <Up/Down>, the display will show “
Set Universe
” .
3
．
Press< ENTER>, the display will show
“
Set Universe
”
.
4
．
The display show
“
000~255
”
.
5
．
Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.
8.4.8 Reset Default
With this function, you can select restore factory set for ON or OFF, the default is OFF.
1
．
Tap <MODE/ESC>button
，
access the main menu
，
Tap the <Up/Down>button until
“
Personality
”
is displayed. Press ENTER, the display will show
“
Personality
”
.
2
．
Press <Up/Down>, the display will show “ Reset Default ” .
3
．
Press< ENTER>, the display will show
“
Reset Default
”
.
4
．
The display show
“
OFF
”
,Press <Up/Down>, the display will show “ON”.
5
．
Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.
8.5 Reset-function
With this function you can reset the device via the Control Board. You can select the different
reset functions by turning the encoder.
1
．
Tap <MODE/ESC>button ， access the main menu ， Tap the <Up/Down>button until
“ Reset-functions ” is displayed. Press ENTER, the display will show “ Reset-functions ” .
2
．
The display show
“
Reset All
”
, Press <Up/Down>, the display will show
“
Reset
Pan/Tilt ” ， “ Reset Colors”, “Reset Gobos”, “Reset Shutter”, “ Reset Other ”.
3
．
Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.
8.6 Effect Adjust
8.6.1 Test channel
With this function you can test each channel on its (correct) function.
1
．
Tap <MODE/ESC>button
，
access the main menu
，
Tap the <Up/Down>button until
“
Effect Adjust
”
is displayed. Press ENTER, the display will show
“
Effect Adjust
”
.
2
．
Press <Up/Down>, the display will show “ Test Channel ” .
3
．
Press< ENTER>, the display will show
“
Test Channel
”
.
4
．
The display show
“
Pan Moving
”
frist channel, Press <Up/Down>, can choose other
channel.