Tristel Stella System A, User Manual, Page: 39 / 52

36
ELECTROMAGNETIC EMISSIONS
AND IMMUNITY IEC 61326-1:2013
STELLA
For electromagnetic emissions the Stella System has been tested for compliance to IEC 61326-1,
CISPR11 Group 1, Class B. Testing has been performed using the following parts with Stella System.
ITEM DESCRIPTION LENGTH MANUFACTURER PART NUMBER
USB Cable Type A to B 1m Dynamix C-U2AB-1
GPP10 Medial Power Plug Pack 1.8m DC lead FRIWO 1950067
WARNINGS
Use of accessories and cables other than those specified, with the exception of the power pack and cables
sold by the manufacturer of the Stella System as replacement, may result in increased emissions or decreased
immunity of the Stella System.
ADJACENT EQUIPMENT
The Stella System should not be used adjacent to, or stacked with, other equipment. If adjacent or stacked
use is necessary, the Stella System should be observed to verify normal operation in the configuration in which
it will be used.
OPERATION IN WET AREAS
Keep IQ and Pulse clear from wet areas when they are placed on charge or connected to a computer terminal using
a USB cable. Do not attempt to use the Stella System for disinfection purposes while charging or downloading.
In the case of long-term storage, remove IQ and Pulse from the Base and keep it clear from wet areas.
CLOSE POWER CAP
Remove all cables from IQ and Pulse and ensure the rear power caps are closed firmly while IQ or Pulse are in
use during cleaning and disinfection cycles.
Declaration for compliance: The Stella System complies with all IEC 61326-1 Test Levels of this collateral standard
for power frequency magnetic field immunity requirement.