Tristel Stella System A, User Manual, Page: 23 / 52

20
BATTERY MANAGEMENT
Always ensure IQ and Pulse are fully charged.
IQ will display the battery status for the full Stella System. If you have Stella System B or C, IQ will also
display the battery status for Pulse. There are five indicators of charge, which will determine how many
cycles can be performed.
Step 1
The power adaptor plug comes in two parts. Before use, fit the pins and the backing together ensuring they
have clicked into place.
To replace the power plug pins, press the release button, and remove.
Step 2
Disconnect IQ and Pulse from the Base and plug in the power adaptor via the power port on the back of the
IQ and Pulse units.
Only the supplied power adaptor should be used. The use of other adaptors may damage the equipment or cause
malfunctions.
Step 3
Once plugged in, IQ will display the status of the charging.
Do not charge IQ or Pulse whilst they are attached to the Base or near solution.
Ingress of solution will cause damage or malfunctions to the equipment.
The battery is 76 - 100% full
60 - 80 cycles available
The battery is 51 - 75% full
41 - 59 cycles available
The battery is 26 - 50% full
The battery is 11 - 25% full
9 - 20 cycles left
21 - 40 cycles left
The battery is 0 - 10% full
0 - 8 cycles left
LUBING IQ PROCESS
During set up and every six months, a little amount of Lube should be applied to the IQ drainage inlets to ensure
the IQ is connected securely onto the Base.
Wearing gloves, take a small amount of Lube and apply to the perimeter of each drainage inlet.
Ensure the Lube is applied evenly. Do not apply Lube to the IQ drainage outlet, where the Drainage Hose is attached.
SECTION 5, MAINTENANCE