6
7
IMPORTANT: Your juicer has been shipped with the components shown below.
Check everything carefully before use. If any part is missing or damaged, do not
use this product and contact Customer Service using the contact information
located on the back of this manual.
PUSHER
LID AND PULP GUARD
CHUTE
SELF-CLEANING
BUTTON
PULP COLLECTOR
POWER BASE
CLEANING BRUSH
May be sold separately
RECEPTACLE
BLADE/FILTER
SPOUT
LOCKING
BAR
Parts & Accessories
Before First Use
Ensure that all packing materials
have been removed, including any
clear or plastic film. Running the
appliance with any of this material
still intact may cause serious damage.
Disassemble the appliance (see the
“Disassembly” section). Clean the
appliance (see the “Care & Cleaning”
section). Dry all parts thoroughly
before use. Assemble the appliance
(see the “Assembly” section).
1. Clean and cut ingredients to
a size that will fit in the Chute.
Ensure that all pits and large
stems are removed. Small
seeds and skins should not be a
problem if you wish to use them.
2. Place the appliance on a stable
countertop or table. Plug the
power cord into a 110V outlet.
Select the speed you wish to use
based on the type of food you are
juicing and allow the appliance to
run for a few seconds.
Instructions for Use
FIG. A
3. Before juicing, ensure the Spout is
pointed downward and properly
aligned with your glass or container
(see Fig. A).
4. Use the Pusher to guide the
ingredients into the Chute with a
smooth, steady motion. You should
see the juice beginning to flow into
your glass or container, and the
pulp will begin to collect on the Lid
and in the Pulp Collector.
5. Immediately after use, clean
the appliance (see the “Care &
Cleaning” section).
NOTE: Sometimes, you may need to
remove excess food or pulp when
making large quantities of juice. This
appliance’s self-cleaning function can
be used to clean moderate amounts
of food from the appliance (see the
“Self-Cleaning” section). If there is a
large build-up of food, unplug the
appliance, remove the Lid, and clean
the Blade/Filter and Pulp Chute.
