16
Troubleshooting
Symptom
Possible Cause/Solution
Appliance does not run
when switched on
Check to see if the appliance is plugged in.
Locking bar is not locked in place properly.
Check if all parts are assembled.
Check if there is any residue left between the blade and the receptacle.
Make sure you wait 5–10 minutes to restart if the appliance
automatically shuts down.
Motor is unusually
loud and vibrating
Check that all parts are assembled properly and in the correct position.
Juicing fibrous items can create a lot of pulp and clog the Blade/Filter.
Turn off the appliance and clean the Blade/Filter.
The motor overheats
causing the power to
automatically shut off
Applying too much pressure with the Pusher while processing can cause
the motor to overheat, which activates the built-in thermal cut-off switch.
The motor will stop working for approximately 10 minutes to cool down
(see the “Safety Features” section).
The fruits and vegetables may be soft or overripe.
There may be too much pulp in the filter. Turn the appliance off
and clean the filter.
No juice is coming
out of the Spout
Make sure the Spout is facing downward while juicing. If the Spout
is facing upward, juice will not come out of the Spout and may overflow
out of the receptacle.
Some produce, such as berries, may not be juicy enough. Add juicier
produce, such as apples and oranges, to the juicer to help push the juice
through the juicer.
SELF-CLEANING JUICER
