4
Features
Service
Before installing and operating your transformer module, familiarize yourself with the location and function of its features.
Rear Panel
Your Tripp Lite product is covered by the warranty described in this manual. A variety of Extended Warranty and On-Site Service Programs are
also available from Tripp Lite. For more information on service, visit www.tripplite.com/support. Before returning your product for service, follow
these steps:
1. Review the installation and operation procedures in this manual to insure that the service problem does not originate from a misreading of
the instructions.
2. If the problem continues, do not contact or return the product to the dealer. Instead, visit www.tripplite.com/support.
3. If the problem requires service, visit www.tripplite.com/support and click the Product Returns link. From here you can request a Returned
Material Authorization (RMA) number, which is required for service. This simple on-line form will ask for your unit’s model and serial
numbers, along with other general purchaser information. The RMA number, along with shipping instructions will be emailed to you. Any
damages (direct, indirect, special or consequential) to the product incurred during shipment to Tripp Lite or an authorized Tripp Lite service
center is not covered under warranty. Products shipped to Tripp Lite or an authorized Tripp Lite service center must have transportation
charges prepaid. Mark the RMA number on the outside of the package. If the product is within its warranty period, enclose a copy of your
sales receipt. Return the product for service using an insured carrier to the address given to you when you request the RMA.
3
3
5
4
1
1
3
2
1
AC Output Receptacles:
Accepts direct plug-in connection of NEMA 5-15P or NEMA 5-20P equipment plugs.
2
AC Outlet Receptacle:
Accepts direct plug-in connection of L6-30R equipment plugs.
3
AC Output Breakers:
Push-button breakers control output power to transformer module's AC Output Receptacles,
which are directly adjacent.
4
Overtemperature Reset Breaker:
Trips if the transformer’s temperature climbs too high. To reset the breaker,
reduce the load and allow the unit to cool for at least 30 minutes. After 30 minutes, press the breaker button.
5
Input Power Cord:
Plugs into L6-30R receptacle.
