4
Specifications
Model:
PVINT375
Output Power (Maximum Continuous Watts)*:
375
Output Power (Peak Watts)**:
600
Input Voltage (DC):
12V nominal (10-15V)
Output Voltage (AC)/Frequency:
230V / 50 Hz. nominal
Output Waveform:
PWM Sine Wave
Low Battery Voltage Alarm (Volts):
10.5V
Low Battery Voltage Shutdown (Volts):
10V
AC Outlets:
1
Circuit Protection (DC Overload):
40-amp fuse (external)
* Maximum output power (continuous or peak) only available when vehicle battery is properly charged. Run vehicle
engine often to maintain proper charge. ** Peak Output Power is instantaneous.
Typical Runtimes Before Battery Recharge
Although you can operate your Inverter with your vehicle engine off, best results are usually attained
with the engine running. Since the Inverter converts electrical energy (and doesn’t produce it),
the Inverter’s performance is relative to the condition of your vehicle’s electrical system (battery,
alternator and wiring). If other loads (air conditioner, heater, lights, etc.) are also using power, you
may get less runtime.
Model: PVINT375
With Typical Compact
Vehicle (4 cylinder) Battery,
Alternator & Wiring
With Typical Mid-Size
Vehicle (6 cylinder) Battery,
Alternator & Wiring
With Typical Full-Size
Vehicle (8 cylinder) Battery,
Alternator & Wiring
1/2 Load
(engine on/engine off)
continuous/1-2 hours
continuous/2-3 hours
continuous/3-6 hours
Full Load*
(engine on/engine off)
continuous/30 min-1 hour
continuous/1-2 hours
continuous/2-3 hours
Vehicle Electrical System Limitations
Note:
Due to the limitations of certain vehicles’ 12V DC lighter/accessory outlet electrical systems, you may
not be able to continuously run a full load (375 watts) from your PVINT375. If you regularly blow fuses, it may
indicate your vehicle is not adequately wired to support a PVINT375 as it is designed. In this case, consult vehicle
manufacturer recommendations for rewiring from the fuse block or battery with appropriate wiring (8 - 10 gauge)
and fusing (at least 40 amp).
19-04-289-932610.indb 4
5/14/2019 1:37:16 PM