2
1
2
Important Safety Instructions
Clamp Mounting
(Included with Select Models)
SAVE THESE INSTRUCTIONS
• DO NOT connect the power strip to an ungrounded outlet.
• DO NOT use the power strip with 2-wire extension cords or adapters.
• This power strip is designed for indoor use only. Install the power strip away from heat-emitting
appliances such as radiators or heat registers.
• Do not install where excessive moisture is present.
• Do not plug extension cords into the power strip.
• Never install electrical, telephone, network or coaxial wiring during a lightning storm.
• Do not drill into any part of the housing or open the housing for any reason. There are no
user-serviceable parts inside.
• Use of this equipment in life support applications where failure of this equipment can
reasonably be expected to cause the failure of the life support equipment or to significantly
affect its safety or effectiveness is not recommended.
Clamp mounts attach to a desk, tabletop, workbench or other solid, flat surface. Your Tripp Lite
Power Strip is compatible with the clamp mounts. For power strip models that do not include
clamp mounts, clamps can be purchased at www.tripplite.com.
1
To install the clamp, loosen the knob, then slide
the clamp firmly onto the edge of an appropriate
surface. Turn the knob to tighten and secure the
clamp to the surface. Repeat for any additional
clamps.
Note:
If the mounting clip is loose, use a screwdriver to
tighten the screw.
2
Push the Power Strip into the clamp mount
clip(s) until it securely snaps into place.
19-03-135-933971.indb 2
4/4/2019 11:02:35 AM
