background image

8

Specifications

MODEL:

PV 500FC

PV 1000FC

Weight:

15 lbs.

20 lbs.

INVERTER

Continuous power  (@ 20° C):

500 W

1000 W

Surge power:

1000 W

2000 W

Efficiency (Full Load):

90%

90%

Minimum DC Fuse Rating:

100 A

200 A

DC Input Current @ Nominal V DC

Full Load

50 A

100 A

No Load

2.2 A

2.2 A

Nominal DC Input:

12 VDC

12 VDC

DC Input Voltage Range:

10-15 VDC

10-15 VDC

Nominal Output Volts:

120 VAC ±5%

120 VAC ±5%

Nominal Output Frequency:

60 Hz ±.3%

60 Hz ±.3%

MODEL:

PV 2000FC

PV 2400FC

Weight:

37lbs.

40 lbs.

INVERTER

Continuous power  (@ 20° C):

2000 W

2400 W

Surge power :

4000 W

4800 W

Efficiency (Full Load):

90%

90%

Minimum DC Fuse Rating:

400 A

250 A

DC Input Current @ Nominal V DC

Full Load

200 A

120 A

No Load

2.2 A

2.2 A

Nominal DC Input:

12 VDC

24 VDC

DC Input Voltage Range:

10-15 VDC

20-30 VDC

Nominal Output Volts:

120 VAC ±5%

120 VAC ±5%

Nominal Output Frequency:

60 Hz ±.3%

60 Hz ±.3%

Limited Warranty

Tripp Lite warrants its products to be free from defects in materials and workmanship for a period of one year (domestic) or 120 days (export)
from the date of initial purchase.  Tripp Lite’s obligation under this warranty is limited to repairing or replacing (at its sole option) any such
defective products. To obtain service under this warranty you must obtain a Returned Material Authorization (RMA) number from Tripp Lite
or an authorized Tripp Lite service center.  Products must be returned to Tripp Lite or an authorized Tripp Lite service center with transportation
charges prepaid and must be accompanied by a brief description of the problem encountered and proof of date and place of purchase. This
warranty does not apply to equipment which has been damaged by accident, negligence or misapplication or has been altered or modified in
any way.  This warranty applies only to the original purchaser who must have properly registered the product within 10 days of purchase.

EXCEPT AS PROVIDED HEREIN, TRIPP LITE MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  Some states do not permit limitation or exclusion of implied
warranties; therefore, the aforesaid limitation(s) or exclusion(s) may not apply to the purchaser.

EXCEPT AS PROVIDED ABOVE, IN NO EVENT WILL TRIPP LITE BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR
CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF THIS PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
DAMAGE.  Specifically, Tripp Lite is not liable for any costs, such as lost profits or revenue, loss of equipment, loss of use of equipment, loss
of software, loss of data, costs of substitutes, claims by third parties, or otherwise.

Maintenance & Service

Maintenance

Your PowerVerter model requires no maintenance but should be kept dry at all times. Periodically
check all cable connections both at the unit and at the battery. Clean and tighten connections as
necessary.

Service

If returning your PowerVerter to Tripp Lite, please pack the PowerVerter carefully, using the
ORIGINAL PACKING MATERIAL that came with the unit. Enclose a letter describing the symptoms
of the problem. If the PowerVerter is within the warranty period, enclose a copy of your sales receipt.

200002001 CURRENT PV 500-2400FC.p65

6/22/00, 11:39 AM

8

Summary of Contents for PowerVerter Plus PV 1000FC





















Reviews: