Tripp Lite NetDirector B024-DPU08 Owner'S Manual Download Page 19

Page: 19 / 64

7. Installation

7.3.3 Multi-Display Installation

The B024-DPU08 and B024-DPU16 multi-display feature allows you to stack up to 8 units in a dual/triple/quad-

display/multi-display installation to control up to seven (B024-DPU08) or fifteen (B024-DPU16) computers at once.

This installation requires slightly different cabling than the standard cascade and offers an extra level of switching

flexibility for multiple-monitor installations where each computer is equipped with multiple video cards.

Note:

In a multi-display installation, the B024-DPU08 can only be connected to B024-DPU08 units, and the B024-DPU16 can

only be connected to B024-DPU16 units.

Use a standard USB Type-A to USB Type-B cable to connect the Port 8 USB Type-B port on the First Stage

unit to the USB Type-A port in the Console Ports Section of the second switch.

Notes:

• Port 8 is reserved to connect the units in a multi-display installation. Up to seven (B024-DPU08) or fifteen (B024-DPU16)

computers can be attached, using KVM ports 1–7 (B024-DPU08) or ports 1–7/9–16 (B024-DPU16).

• Plug the USB Type-A connector into the lower USB (keyboard) Port in the Console Port Section. Both USB Ports are

marked with a similar icon to remind you of the correct USB port.

Use DisplayPort cables to connect the KVM’s DisplayPort on the second unit to the second video-in port on the

computers.

Note:

Only DisplayPort video cables are necessary–all other ports in the KVM section are not required in this installation.

Connect a display to the console section of the second switch.

Repeat steps 1-3 for any additional units for a total of up to a total of 8 switches.

Connect the cables for the first switch (see section

7.3.1 Single-Stage Installation

for details). All video, audio

and peripheral devices must be connected to the first switch.

Computers with 2/3/4

Video Inputs

Third / Fourth

Stage Units

DisplayPort Cables

USB Type B to

Type A Cable

Second Switch

First Switch

Summary of Contents for NetDirector B024-DPU08

































































Search results

Summary of Contents for NetDirector B024-DPU08

Reviews:

Related manuals for NetDirector B024-DPU08

Brands by name

Popular brands

Tripp Lite NetDirector B024-DPU08, Owner'S Manual

Search results

Summary of Contents for NetDirector B024-DPU08

Reviews:

Related manuals for NetDirector B024-DPU08

Brands by name

Popular brands