4
Mounting
Standard Installation
The B126-2X2 and B126-4X4 includes mounting hardware for a variety
of mounting options. The below images show the different ways the
mounting brackets attach to the receiver unit for each mounting method.
Note:
The images below show a B126-1A1 HDMI over Cat5 Receiver Unit, but the mounting
hardware installation is the same for the B126-2X2 and B126-4X4.
Wallmount 1
Wallmount 2
19” Rackmount
Pole Mount
Note:
1. Test to make sure that the entire installation works properly before pulling cables through
ceilings/walls.
2. 24AWG, Solid Wire Cat5e/6 cable (such as Tripp Lite’s N202-Series) is required to achieve
maximum distance and resolution.
3. The diagram below shows a B126-2X2 installation. Installation will be the same for the
B126-4X4, except for the number of ports.
4. The back panel of the B126-4X4 contains an IR port which has been capped off. This port is
intended for future use, and does not currently function.
14-11-047-9333F8.indd 4
11/10/2014 3:14:35 PM
