background image

7

 Warranty and Product Registration

1-YEAR LIMITED WARRANTY

TRIPP LITE warrants its products to be free from defects in materials and workmanship for 
a period of one (1) year from the date of initial purchase. TRIPP LITE’s obligation under this 
warranty is limited to repairing or replacing (at its sole option) any such defective products. To 
obtain service under this warranty, you must obtain a Returned Material Authorization (RMA) 
number from TRIPP LITE or an authorized TRIPP LITE service center. Products must be 
returned to TRIPP LITE or an authorized TRIPP LITE service center with transportation charges 
prepaid and must be accompanied by a brief description of the problem encountered and proof 
of date and place of purchase. This warranty does not apply to equipment, which has been 
damaged by accident, negligence or misapplication or has been altered or modified in any way.
EXCEPT AS PROVIDED HEREIN, TRIPP LITE MAKES NO WARRANTIES, EXPRESS 
OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A 
PARTICULAR PURPOSE.
Some states do not permit limitation or exclusion of implied warranties; therefore, the aforesaid 
limitation(s) or exclusion(s) may not apply to the purchaser.
EXCEPT AS PROVIDED ABOVE, IN NO EVENT WILL TRIPP LITE BE LIABLE FOR DIRECT, 
INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE 
USE OF THIS PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 
Specifically, TRIPP LITE is not liable for any costs, such as lost profits or revenue, loss of 
equipment, loss of use of equipment, loss of software, loss of data, costs of substitutes, claims by 
third parties, or otherwise.

PRODUCT REGISTRATION

Visit www.tripplite.com/warranty today to register your new Tripp Lite product. You'll be 
automatically entered into a drawing for a chance to win a FREE Tripp Lite product!*
* No purchase necessary. Void where prohibited. Some restrictions apply. See website for details.

16-04-148-9334B1-EN.indd   7

5/2/2016   3:03:02 PM

Summary of Contents for B125-101-60-IR









Reviews: