50
Filtering
(continued)
MAC Filtering
AP Operation
IP Filtering
To add an IP Filter:
1. Check the IP Filter Enable check box
2. Click Add. A dialog box similar to the one below appears:
To add a MAC Filter:
1. Click Add. A dialog box similar to the one below appears:
3. Type the IP address (or the first IP address in a range of IP
addresses) you wish to filter in the dialog box and click OK. A
second dialog box, similar to the one below, appears:
4. To filter a single IP address, key in the same address as the start IP.
To filter a range of addresses, key in the last IP address in the range
you wish to filter.
5. After filling in the address, click OK.
6. Repeat these steps for any additional IP addresses you want to filter.
To delete an IP Filter:
Select the desired IP Filter from the list and click Remove.
To modify an IP Filter:
1. Select the desired IP Filter from the list and click Edit. An Edit
dialog box similar to the Add dialog box will appear.
2. Delete the old start IP address and replace it with the new one.
Click OK.
3. Delete the old end IP address and replace it with the new one. Click
OK.
Note: To block a computer from accessing the B051-000, you do not
need to filter both its IP address and its MAC address. Any computer
blocked by an IP Filter will be denied access to the B051-000, even
if the computer is allowed to access the B051-000 under the MAC
Filters that are set up.
2. Type in the desired MAC address and click OK.
3. Repeat these steps for any additional MAC addresses you want to
filter.
To delete a MAC Filter:
Select the desired MAC Filter from the list and click Remove.
To modify a MAC Filter:
• Select the desired MAC Filter from the list and click
Edit. An Edit
dialog box similar to the Add dialog box appears.
• Delete the old address and replace it with the new one. Click
OK.
Note: To block a computer from accessing the B051-000, you do not
need to filter both its IP address and its MAC address. Any computer
blocked by a MAC Filter will be denied access to the B051-000, even
if the computer is allowed to access the B051-000 under the IP filters
that are set up.
