Tripp Lite B051-000 Owner'S Manual Download Page 5

Page: 5 / 65

Introduction

Browsers

Virtual Media Support

Cables

Operating Systems

• A KVM cable kit is required to connect the B051-000 to a KVM switch or server. (1) PS/2 KVM cable kit and (1) USB KVM cable kit is

included with the unit.

Note: If the included KVM cable kit is too short, Tripp Lite has P774-Series (PS/2) and P776-Series (USB) KVM Kits available in extended
lengths.

• A console connector kit is required to connect a local console to the B051-000 IP Remote Access Unit. A USB – PS/2 Console connector kit is

included with the unit.

• A USB 2.0 A to Mini-B 5-Pin device cable (included) is required for use with the Virtual Media function.

• Tripp Lite Cat5e (N001- or N002-Series) or Cat6 (N201-Series) cable (not included), should be used to connect the B051-000 IP Remote

Access Unit to a network.

Supported browsers for users that are accessing the B051-000
remotely include the following:

• Supported operating systems for computers/servers that are

connected to the B051-000, or are connected to a KVM switch that
is connected to the B051-000, are shown:

• Computer/servers remotely accessing the B051-000 must have

Windows 2000 or higher, or an operating system that is capable of
running Sun’s Java Runtime Environment (JRE) 6, Update 3 or
higher.

Operating System

Version

Windows

2000 and higher

Linux RedHat

7.1 and higher

Linux Fedora

Core 5 and higher

Linux SuSE

9.0 and higher

Linux Mandriva (Mandrake)

9.0 and higher

UNIX AIX

4.3 and higher

UNIX FreeBSD

3.51 and higher

UNIX Sun

Solaris 8 and higher

Novell Netware

5.0 and higher

Mac

OS 9 and higher

DOS

6.2 and higher

Note: The operating systems in the table above are supported by the
B051-000 only. Any KVM switch connected to the B051-000 must
be compatible with them as well, or the system will not function
properly.

Browser

Version

Internet Explorer

6 and higher

Firefox

1.5 and higher

Mozilla

1.7 and higher

Safari

2.0 and higher

Opera

9.0 and higher

Netscape

8.1 and higher

• USB CD-ROM/DVD-ROM Drives.

• USB Floppy Drives.

• USB Flash Drives.

• IDE CD-ROM/DVD-ROM Drives.

• Image Files (.iso).

Summary of Contents for B051-000


































































Search results

Summary of Contents for B051-000

Reviews:

Related manuals for B051-000

Brands by name

Popular brands

Tripp Lite B051-000, Owner'S Manual

Search results

Summary of Contents for B051-000

Reviews:

Related manuals for B051-000

Brands by name

Popular brands