background image

2

Installation and Operation

Refer to the installation diagram on page 3 as you perform these steps.

Note:
1. Test to make sure the entire installation works properly before pulling cables through 

ceilings/walls.

2. To achieve maximum distance and performance, 24Awg solid wire Cat5e/6 cable 

must be used. The use of stranded wire Cat5e/6 cable, or cable with a gauge size 
higher than 24Awg will result in shorter extension distance. All  

Tripp Lite N202-Series Cat6 cables are made with 24Awg, solid wire cabling.

3. Make sure the power to all devices you are connecting to is turned off prior to 

installation.

4. The Green LED will illuminate to indicate that power is being received from the 

source and monitor. When functioning properly, only the Green LED will be lit.  
If the Red LED is illuminated, it means that the remote receiver is not receiving a 
functional signal from the source. 

Product Features

• 

Extend a 1080p (24Hz), or a 1080i (60Hz), signal up to 150 ft. using 

Cat6 cabling, or up to 100 ft. using Cat5 cabling

• Fully automatic equalization up to 40dB—no system control required
• No external power required
• HDCP compatible

Optional Accessories

• N046-000 110 Punchdown Tool
• N048-000 Cable Stripping Tool
• N202-Series Cat6 24Awg, solid wire patch cables
• N222-01K-GY Gray 1,000-ft. Cat6 solid wire bulk cable
• P568-Series High Speed HDMI cables

17-12-286-93-2787.indd   2

1/26/2018   1:31:08 PM

Summary of Contents for 8TLP167000

Page 1: ...s Copyright 2018 Tripp Lite All rights reserved All trademarks are the sole property of their respective owners Local Transmitter and Remote Receiver Wallplates 110 Punchdown Tool x4 Wallplate screws Owner s Manual Package Contents PROTECT YOUR INVESTMENT Register your product for quicker service and ultimate peace of mind You could also win an ISOBAR6ULTRA surge protector a 100 value www tripplit...

Page 2: ... installation 4 The Green LED will illuminate to indicate that power is being received from the source and monitor When functioning properly only the Green LED will be lit If the Red LED is illuminated it means that the remote receiver is not receiving a functional signal from the source Product Features Extend a 1080p 24Hz or a 1080i 60Hz signal up to 150 ft using Cat6 cabling or up to 100 ft usi...

Page 3: ...own tool is provided for your convenience For best results use a professional punchdown tool such as the Tripp Lite N046 000 3 Connect the DDC 110 punchdown connector on the local transmitter to the DDC 110 punchdown connector on the remote receiver using Cat5e 6 cable Note See the installation diagrams for maximum extension distance The included 110 punchdown tool is provided for your convenience...

Page 4: ...SIBILITY OF SUCH DAMAGE Specifically TRIPP LITE is not liable for any costs such as lost profits or revenue loss of equipment loss of use of equipment loss of software loss of data costs of substitutes claims by third parties or otherwise Use of this equipment in life support applications where failure of this equipment can reasonably be expected to cause the failure of the life support equipment ...

Reviews: