background image

4

Warranty and Warranty Registration

3-Year Limited Warranty

TRIPP LITE warrants its products to be free from defects in materials and workmanship for a period of three (3) years from 
the date of initial purchase. TRIPP LITE’s obligation under this warranty is limited to repairing or replacing (at its sole option) 
any such defective products. To obtain service under this warranty, you must obtain a Returned Material Authorization 
(RMA) number from TRIPP LITE or an authorized TRIPP LITE service center. Products must be returned to TRIPP LITE or an 
authorized TRIPP LITE service center with transportation charges prepaid and must be accompanied by a brief description of 

the problem encountered and proof of date and place of purchase. This warranty does not apply to equipment, which has 
been damaged by accident, negligence or misapplication or has been altered or modified in any way.
EXCEPT AS PROVIDED HEREIN, TRIPP LITE MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF 
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
Some states do not permit limitation or exclusion of implied warranties; therefore, the aforesaid limitation(s) or 
exclusion(s) may not apply to the purchaser.
EXCEPT AS PROVIDED ABOVE, IN NO EVENT WILL TRIPP LITE BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL 
OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF THIS PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY OF 
SUCH DAMAGE. Specifically, TRIPP LITE is not liable for any costs, such as lost profits or revenue, loss of equipment, loss 
of use of equipment, loss of software, loss of data, costs of substitutes, claims by third parties, or otherwise.
Use of this equipment in life support applications where failure of this equipment can reasonably be expected to cause the 
failure of the life support equipment or to significantly affect its safety or effectiveness is not recommended. Do not use 
this equipment in the presence of a flammable anesthetic mixture with air, oxygen or nitrous oxide.

WEEE Compliance Information for Tripp Lite Customers and Recyclers 

(European Union)

Under the Waste Electrical and Electronic Equipment (WEEE) Directive and implementing regulations, when customers buy 
new electrical and electronic equipment from Tripp Lite they are entitled to:
• Send old equipment for recycling on a one-for-one, like-for-like basis (this varies depending on the country)

• Send the new equipment back for recycling when this ultimately becomes waste

WARRANTY REGISTRATION

Visit www.tripplite.com/warranty today to register the warranty for your new Tripp Lite product. You’ll be automatically 
entered into a drawing for a chance to win a FREE Tripp Lite product!*
* No purchase necessary. Void where prohibited. Some restrictions apply. See website for details.
Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice.

1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support

17-12-286 93-2787_RevD

17-12-286-93-2787.indd   4

1/26/2018   1:31:08 PM

Summary of Contents for 8TLP167000

Page 1: ...s Copyright 2018 Tripp Lite All rights reserved All trademarks are the sole property of their respective owners Local Transmitter and Remote Receiver Wallplates 110 Punchdown Tool x4 Wallplate screws Owner s Manual Package Contents PROTECT YOUR INVESTMENT Register your product for quicker service and ultimate peace of mind You could also win an ISOBAR6ULTRA surge protector a 100 value www tripplit...

Page 2: ... installation 4 The Green LED will illuminate to indicate that power is being received from the source and monitor When functioning properly only the Green LED will be lit If the Red LED is illuminated it means that the remote receiver is not receiving a functional signal from the source Product Features Extend a 1080p 24Hz or a 1080i 60Hz signal up to 150 ft using Cat6 cabling or up to 100 ft usi...

Page 3: ...own tool is provided for your convenience For best results use a professional punchdown tool such as the Tripp Lite N046 000 3 Connect the DDC 110 punchdown connector on the local transmitter to the DDC 110 punchdown connector on the remote receiver using Cat5e 6 cable Note See the installation diagrams for maximum extension distance The included 110 punchdown tool is provided for your convenience...

Page 4: ...SIBILITY OF SUCH DAMAGE Specifically TRIPP LITE is not liable for any costs such as lost profits or revenue loss of equipment loss of use of equipment loss of software loss of data costs of substitutes claims by third parties or otherwise Use of this equipment in life support applications where failure of this equipment can reasonably be expected to cause the failure of the life support equipment ...

Reviews: