10
Sensor Type
: Select DISABLE to deactivate sensor recording or choose the type of
sensor as NORMAL-CLOSE or NORMAL-OPEN installed in DVR.
In general, three common sensor types are available in home electronic store: (1)
Normal-Close, (2) Normal-Open and (3) Normal-Close & Open.
Below is the brief
diagram about how each type of sensor is installed on DVR. The procedure for
sensor installation is shown as below.
Alarm Duration
: This item set the alarm duration after alarm is activated as 5, 10, 15,
20, 25, 30 or continue and off.
Alarm by
: Select alarm by Buzzer, Alarm Device or Both
3.5 Motion Detection Setting
In this function, by setting motion area, sensitivity and alarm on each channel, the
DVR will start to record on motion detection schedule according to the setting value.
Channel
: Select the channel for recording mode.
Sensitivity
: Adjust sensitivity of the built-in motion sensor, the most sensitive goes to
1, and the least goes to 4.
Motion Area
: Use this option to set the range of motion detection area. Move the
cursor to starting area, press ENTER button in order to start selecting. Use
UP/DOWN/RIGHT/LEFT button move cursor to draw an area, press ENTER again to
set down the selected area.
Alarm Duration
: Set the alarm duration since alarm was activated in 5~30 seconds
or Continue and Off.
Alarm by
: Select alarm by Buzzer, Alarm Device or Both
3.6 Screen Adjustment
In this function, user can adjust the screen setting with screen location, border line or
auto sequence.
Border
: Set the white border line around each channel by selecting ON, and close by
selecting OFF.
Video Adjustment
: To adjust the horizontal and vertical location of
screen by using UP/DOWN/RIGHT/LEFT button.
Auto Sequence
: To setup the sequence for each channel display on full screen from
2 to 30 seconds.
720 video Out:
To setup 720 resolution video output. Reboot DVR after actuation.
