6.
Max Min Avg Max‐Min Setting
Enter the Setting mode. Advance until the
MAX
–
MIN AVG
icon flashes. Press up
for ON or OFF.
Press
to store the setting
7.
Alarm HI Setting
Enter the Setting mode. Advance until the
Alarm HI
icon flashes. Press up
or down
for ON or OFF. Press
to store the setting If
ON was selected, press up
or down
to
adjust the limit. Press
to store the setting
8.
Alarm LO Setting
Enter the Setting mode. Advance until the
Alarm LO
icon flashes. Press up
or down
for ON or OFF. Press
to store the setting If
ON was selected, Press up
or down
to
adjust the limit. Press
to store the setting
9.
Backlight Setting
Enter the Setting mode. Advance until the
LItE
icon flashes.
Press up
or down
for ON or OFF. Press
to store the setting
10.
Auto Power OFF Setting
Enter the Setting mode. Advance until the
APO
icon flashes.
Press up
or down
to adjust the setting. Press
to store the
setting
Surface Temperature Measurements
1. Typical setting should be: Laser pointer ON, Backlight ON,
Temperature units set as needed, Emissivity set to 0.95, APO (auto
