Inspect for damage or for
any shortage of parts or
accessories before use
•
Replace the batteries immediately after the
battery indicator flashes
o
Do not use the
thermometer near explosive gases, steam,
or dust
•
Note that an object with high reflectivity will normally cause the measured
temperature value to read much lower than the actual temperature
•
Use the device only as described in this User Guide
Cautions
•
To avoid thermometer damage, please avoid the following hazards:
EMF from welding
equipment or electro‐
induction heaters
o
Static
electricity
•
Thermal shock caused by large or abrupt environmental temperature
changes; wait 30 minutes to allow the thermometer to stabilize to new
environmental conditions
•
Do not use this device in excessively high temperature environments
Meter Description
METER DESCRIPTION
1. LCD Display
2. MENU/MODE Button
3.
Laser
4.
UV LEDs
5.
IR Sensor
6. Power On/Measure Trigger
7. Battery Compartment
