negative COM jack. Insert
the red test lead banana
plug into the positive V jack.
3. Touch the test leads to the capacitor to be tested.
4. Read the capacitance value in the display
TEMPERATURE MEASUREMENTS
1. Set the function switch to the green Temp position.
2. Insert the Temperature Probe into the input jacks,
making sure to observe the correct polarity.
3. Press the MODE button to indicate “ºF” or “ºC”
4. Touch the Temperature Probe
head to the part whose
temperature you wish to
measure. Keep the probe
touching the part under test until
the reading stabilizes (about 30
seconds).
5. Read the temperature in the display.
Note: The temperature probe is fitted with a type K mini
connector. A mini connector to banana connector adaptor is
supplied for connection to the input banana jacks.
Note: The temperature range of the supplied thermocouple
probe is -20 to 250°C (-4 to 482°F)
www.
.com
1.800.561.8187
